home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19971216-19980424
/
000074_news@newsmaster….columbia.edu _Sat Jan 10 19:59:23 1998.msg
< prev
next >
Wrap
Internet Message Format
|
1998-04-22
|
2KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id TAA23623
for <kermit.misc@watsun.cc.columbia.edu>; Sat, 10 Jan 1998 19:59:22 -0500 (EST)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id TAA25321
for kermit.misc@watsun; Sat, 10 Jan 1998 19:59:22 -0500 (EST)
Path: news.columbia.edu!sol.ctr.columbia.edu!news.mindlink.net!paralynx!paralynx-2!uniserve!newsfeeds.sol.net!news.webspan.net!newsfeed.internetmci.com!139.130.235.93!news.telstra.net!sa.news.telstra.net!nsw1.news.telstra.net!innfeed.telstra.net!nsw.news.telstra.net!ozemail!news.mel.aone.net.au!newsfeed-in.aone.net.au!news.mel.connect.com.au!not-for-mail
From: Ross Irvine <rirvine@netlink.com.au>
Newsgroups: comp.protocols.kermit.misc
Subject: Sending a Raw binary file?
Date: Sun, 11 Jan 1998 11:14:30 +1100
Organization: Australian NetLink
Lines: 26
Message-ID: <34B80EE6.6B7D@netlink.com.au>
NNTP-Posting-Host: kermit.netlink.com.au
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 3.01C-NSCP (Win95; I)
Cache-Post-Path: kermit.netlink.com.au!unknown@dl015.netlink.com.au
Xref: news.columbia.edu comp.protocols.kermit.misc:8246
Hi,
I'd like to know how to send a raw binary file with Kermit for DOS
3.15.
The reason for this, is I want to be able to upgrade the flash rom on
some ISDN modems that I have attached to kermit 3.15. I havce the
instructions on how this is done without using the modem's windows 95
gui.
I looked at using TRANSMIT but it waits for prompts and converts lf/cr
etc so that's no good. I also looked at using TYPE, but if it's like DOS
type it's end on a control-z. Obviously using SEND will be no good as
it'll also send the kermit protocol information.
I need a way of sending a binary file to the com port that doesn't do
any convertion of cr/lf, doesn't expand \% codes etc.
Any ideas?
P.S Sorry if this turns up twice, you know, news servers!
--
Ross Irvine B.CS/CNA E-Mail : rirvine@netlink.com.au
Network Administrator Phone : +61 3 9349-2744
Victorian Breastscreen Registry Fax : +61 3 9349-2711
PO BOX 542 Carlton South, Victoria, Australia 3053